Getting the Default Wifi Password for PLDT and Smart

PLDT

In the Philippines, there’s a good chance that your neighbor’s pldt or globe wifi might be using the default password on their modems. Also, these default wifi passwords can be generated using the wifi network’s ssid. With that said, below are the ways or techniques you can use to crack your neighbor’s wifi password.

Default Wifi Password for PLDT HOME DSL

  1. This guide will work on PLDTHOMEDSL, PLDTmyDSLPAL, and PLDTmyDSLBiz.
  2. Download the Wifi Analyzer program (Android)
  3. Get the Mac Address of your target Wifi.
    wifi analyzer
  4. Take the last 5 digit of your MAC Address. If you MAC is 00:4a:00:d0:44:c0, get 044C0. Convert all letters to upper case.
  5. Combine PLDTWIFI + 5 digit MAC. Your password will be PLDTWIFI044C0.

 

Default Wifi Password for PLDTHOMEDSLxxxxx

  1. Some PLDT HOME DSL wifis have their MAC address as a suffix.
  2. Make sure that the suffix only contains numbers.
  3. Take those 5 digit numbers and multiple them by 3. Example, PLDTHOMEDSL12345, take 12345 x 3 = 37035.
  4. You password will be PLDTWIFI37035.

 

Default Wifi Password for PLDTHOMEFIBR_xxxxxx

  1. Make sure the SSID has an underscore since there is another similar SSID without the underscore.
  2. Take the xxxxxx portion of the SSID and convert them with the table below.
    0 = f 1 = e 2 = d 3 = c
    4 = b 5 = a 6 = 9 7 = 8
    8 = 7 9 = 6 a = 5 b = 4
    c = 3 d = 2 e = 1 f = 0
  3. For example if we have PLDTHOMEFIBR_cdf123, then we take cdf123 and convert them with the table above. That will give us 320edc.
  4. Now attach the resulting conversion to wlan (wlan + converted code). Your password will be wlan320edc.

 

Default Wifi Password for PLDTHOMEFIBRxxxxxx

  1. Make sure the SSID does not contain an underscore else follow the previous guide.
  2. Get the code that represents the xxxxxx in the SSID.
  3. Follow the conversion in the previous guide.
  4. Attach the converted code into PLDTWIFI.
  5. If your SSID is PLDTHOMEFIBR_cdf123, your password will be PLDTWIFI320edc. Take note of the capitalization of the password, the code should be in lowercase while PLDTWIFI is in uppercase.

 

Default Wifi Password for HomeBro_Ultera

  1. Please see the first guide on how to obtain the MAC Address of your target wifi network.
  2. Take the last 5 characters of the MAC address, for example, if we have 00:4a:00:d0:44:c0, get 044C0.
  3. Attach the previous code as a suffix in “HomeBro_”.
  4. You password will be HomeBro_044C0. Codes are in uppercase format.

55 thoughts on “Getting the Default Wifi Password for PLDT and Smart”

    1. This guide is for connecting to various pldt modems/routers using the default password. If you have change the default password of your modem/router, then you will not have this problem. If by chance you are using a default password and someone has connected to your network without your consent, then they may use your connection to download or stream videos causing higher bandwidth usage which slows down your connection speed.

    1. Default password lang ang possible na pwedeng i guess gamit ang mga method sa post. Pag pinalitan na, wala na po pag asa unless kaya mong pumasok sa bahay nila at pindutin ang WPS button sa modem/router ng PLDT.

Leave a Comment

Your email address will not be published. Required fields are marked *